12 Fonctionnement
Horizontal Termination with One 90° Elbow
L’embout doit obligatoirement se trouver dans la zone hachurée du tableau. Utiliser les positions indiquées pour les restricteurs et le diffuseur.
19' max (5.8m)
15 feet (4.5m)
10 feet (3m)
5 feet (1.5m)
0 feet
Restrictor Position # 5
Restrictor
Position # 1
NOTE:
Restrictor positions are based upon lab tests. The ideal restrictor position may vary slightly, especially when the termination is near a demarkation line.
NOTE:
Horizontal sections require a 1/4" (0.250mm) rise every 12" (305mm) of travel.
NATURAL GAS: Min. 2' (0.61m) Section Required
PROPANE (LP): Min. 3' (0.915m) Section Required
19' max (5.8m)
15 feet (4.5m)
10 feet (3m)
5 feet (1.5m)
0 feet
© Travis Industries 4100326 100-01250_000
